Filter
Top Products
If YES is the
answer to both
questions, then
proceed as
follows. If the
answer is NO to
either question,
get a new cap.
8) Hold the CO
2
cylinder through
the fabric of the
Inflatable PFD
(Fig. 15). Position
the replacement
cap with the
water inlet valve
pointing to the
right and press
firmly onto the inflator body and
sealing ring (Fig. 16).
9) While pressing FIRMLY onto the
inflator body, turn the BLACK
locking ring clockwise into the
locked position (Fig. 17). Pull on
the cap to make sure it has locked
onto the inflator body.
10 Inflatable PFD Owner’s Manual
Green Indicator
CAUTION:
Do not turn the
center shaft
FIGURE 13
FIGURE 16
Single
Point
Indicator
Water
Inlet
Valve
FIGURE 14
FIGURE 15
Black
Locking
Ring
Lanyard
FIGURE 17