Mustang Survival MD3183 T3 Life Jacket User Manual


 
5) Ensure the current date is not
past the date on the inflator.
If it is, replace the inflator (see
Re-arming Your PFD, p. 8).
Readiness Checklist
Check your Inflatable PFD and
ensure all of the checkpoints listed
below are true before use.
n Single point status indicator is
green (Fig. 1 and 2).
n Ensure the current date is not past the date on the inflator. If it is,
replace the inflator (see Re-arming Your PFD, p. 8).
n All zippers, Velcro
and waist buckle are securely fastened.
n Oral-inflation dust cap is in the stowed position (Fig. 7).
n Inflatable PFD is not twisted.
n Ensure the inflation pull-tab is hanging on the outside (Fig. 31).
n No rips, tears, excessive abrasion or holes; all seams are securely
sewn; and the cover, straps and hardware are still strong.
Your Inflatable PFD is ready for use if all applicable boxes are checked.
NOTE: Contact your Mustang Dealer if you have any concerns
about the readiness of your Inflatable PFD.
Sizing and Fit
This PFD provides a minimum of 33.7 lbs of buoyancy when inflated and
is designed for wearers over 16 years of age, with a chest range of 30-52
inches (76-132 cm) weighing over 80 pounds (36 kg).
Donning Instructions
It is important that the Inflatable PFD is properly adjusted to fit the
person wearing it. An incorrect fit or improper fastening of attachments
could impede its effectiveness.
1) All belts and straps are already threaded correctly and only need to
be adjusted for fit.
4 Inflatable PFD Owner’s Manual
Single
Point
Status
Indicator
Water Inlet Valve
Lanyard
Manual Inflation
Pull-tab
Hydrostatic Inflator Cap
Yellow Inflator Cap
Cap/Locking Ring
Tabs
Black Locking Ring
Inflator
Body
Expiry
Date
FIGURE 2