Filter
Top Products
VHF NX1000
14
IMPORTANT: To maximize the readability of your transmitted signal,
pause a few seconds after pushing [PTT], hold the microphone 5 to 10
cm from your mouth and speak into the microphone at a normal voice
level.
NOTE: The transceiver has a power save function to conserve the
battery power. The power save function activates automatically when
no signal is received for 3 seconds.
6 MENU
6.1 Dual watch
Dual watch monitors Channel 16 while you are receiving another
channel. If a signal is received on Channel 16, dual watch pauses on
Channel 16 until the signal disappears.
When accessing the main menu in non-private channel mode, press
/ to select D/WATCH and press
to confirm. Then the
D/WATCH function is activated. Press
, or
to cancel
D/WATCH function.
Dual Watch
6.2 Automatic KEYLOCK function
This function will lock the keys automatically. Press to access the
MENU and select KEYLOCK by pressing / and press to
access the KEYLOCK list. There are two options in the list: OFF and
ON. If select OFF, the key lock function doesn’t work. If OFF IS select,
the key lock is activated if no key is pressed within 10 seconds. Press
and hold
for 3 seconds to temporary unlock.