Oceanic 04-8791-07 Scuba Diving Equipment User Manual


 
67
OCi OPERATING MANUAL
© 2002 Design, 2013 Doc. No. 12-5335-r01 (6/27/13)
PC INTERFACE (OCEANLOG, DIVERLOG)
The Settings Upload portion of the PC Interface (PCI) program can be used to set/change Time, Alarms, and Utilities using the
Interface System. The Set Gas group (FO2, PO2 alarms) must be entered using the OCi's button controls.
Information available for retrieval (download) from the OCi to the PC program includes items such as dive number, SI, max
depth, EDT, start date/time, start/end presure, lowest temperature, sampling rate, dive profile, set points, and events.
Prior to attempting to download data from your OCi or upload settings to it, review the Help section of the PCI program. Recom-
mended is to print those sections of Help that you consider appropriate for your Interface activities.
A USB Driver is provided on the Oceanic CD which must be installed on your PC prior to use of the Interface System.
The OCi is configured with a Data Port located on the side (Fig. 174a) that enables it to be connected to a PC USB port using the
special Interface Cable.
To connect the PCI Cable to the OCi:
> position the connector with the red dot at 12 o'clock.
> align the pins of the cable connector with the holes in the data port and press the connector into the port (Fig. 175).
> turn the connector clockwise until the red dot is at 1 o'clock and it locks in (Fig. 176), then release it.
The OCi checks for an external access request every second while Watch Main Time is displayed.
Checks are not to be made if the activation contacts are wet.
For a connection to be made, the Oceanlog or Diverlog program is to be installed on the PC or Mac and open, the associated
USB Driver is to be installed, and the interface cable is to be plugged into the PC or Mac USB Port, then connected to the OCi’s
Data Port.
When a wakeup connection is established, the graphics PC or MAC COMM and 120 SECONDS are to be displayed in place of
the Watch Main and remain on the display counting down from 120 to 00 seconds during which time an Upload or Download
operation can be initiated.
When the operation is initiated using the PC or Mac program, the graphic changes to PC or MAC COMM CONNECTED which
remains on until completion of the upload/download operation, then the Watch Main is displayed and the cable disconnected.
Oceanlog or Diverlog will also to accomodate upload of select releases of firmware (DC operating software) to the OCi using the
same PC or Mac Interface program and cable. The graphic PROGRAM LOADING is displayed during the process.
PC requirements:
• IBM
®
, or compatible, PC with USB Port
• Intel
®
Pentium 4 or better microprocessor
• Microsoft
®
Windows
®
XP, Vista, 7, or 8
• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen
area of display settings
• 128MB of available RAM
• 64MB of available hard drive storage
• Mouse
• CD Rom drive
• Printer
Mac requirements:
• Mac with USB Port
• OSX 10.5 or later
• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen
area of display settings
• 128MB of available RAM
• 64MB of available hard drive storage
• Mouse
• Printer
• Internet connection to download App from the Apple App Store
For software updates, refer to the Oceanic web site at -
www.OceanicWorldwide.com
For support, call Oceanic Customer Service toll free at -
(866) 732-7877, 8 Am to 5 Pm USA Pacific time.
Fig. 174 - PC DATA PORT
a
Fig. 176 - PCI CABLE
(turned, dot at 1 o'clock)
Fig. 175 - PCI CABLE
(insert with dot at 12 o'clock)
dot
TIMER
(counting down)
PCI CABLE
(connection sensed)
dot
FIRMWARE UPDATE
(until complete)