Filter
Top Products
57
Fig.57-SETALGORITHM
Set Algorithm, information includes (Fig. 57):
> Graphics SEt and ALGO
> Set Point graphic PZ+ (or DSAT) flashing
• A (< 2 sec) - to toggle between DSAT and PZ+.
• S (< 2 sec) - to save the setting and access Set CF.
• S (2 sec) - to revert to Set SS.
This feature allows selection of the algorithm to be used for nitrogen
and oxygen calculations for Plan and DTR values.
The setting locks in for 24 hours after NORM dives.
Set Conservative Factor (CF), information includes (Fig. 58):
> Graphics SEt and CF with CF icon
> Set Point graphics ON (or OFF) flashing
• A (< 2 sec) - to toggle between ON and OFF.
• S (< 2 sec) - to save the setting and access Set Glo.
• S (2 sec) - to revert to Set Algorithm.
When CF is set On, NDLs are reduced to values equivalent to those
that would be available at the next higher 3000 foot (915 meter)
Altitude. Refer to tables in back of manual.
Fig.58-SETCF