Filter
Top Products
25
PS PROGRAMMING
You can change the default settings or the programming of
your PS according to your needs. The possible
programmings and their default displays are shown below.
For programming operations, see pages 30 and 31.
Selecting the Ringer Pattern
You can set the PS ringer pattern –
intercom calls and CO calls respectively
– 6 bell patterns and 4 melody patterns.
(default: BELL 1)
Selecting the Vibration and Ring Type
You can select the vibration and ring
type.
(default: OFF)
This program can be set in combination
with ringer VOLUME adjustment (see
page 34) as follows.
Setting the Quick Answer Mode
You can quickly answer an incoming call
by just lifting your PS off the charger.
(default: ON)
Setting the Automatic Answer Mode
You can answer all calls (INT/CO) or
intercom calls (INT ONLY) without
pressing any button when using the
headset.
(default: OFF)
RING PATTERN-INT
BELL1
CHANGE=SELECT
RING PATTERN-CO
BELL1
CHANGE=SELECT
VIBRATION
&
RING
OFF
CHANGE=SELECT
QUICK ANSWER
ON
OFF
AUTO ANSWER
OFF
CHANGE=SELECT
VOLUME Control Button Adjustment
RINGER
VIBRATION ON/
RINGER OFF
MEETING
MODE
RINGER
VIB VIB
RINGER and VIB†
VIB VIB
VIB for 5 sec and then RINGER
OFF
PS
Prog.
RING & VIB
VIB→RING
VIB VIB
†: Battery life may decrease faster than with the other settings.
Display example
ANSWER SETTING
TD7590-E(25~36) 00.8.11 5:06 PM Page 25