Filter
Top Products
Gigabit Media Converter – Installation Guide
10
Operation
Status LED
The Perle Gigabit Media converters have three single color status
LEDs located on the front panel of the unit.
PWR - Power/Test
• On: Power is on and the unit is in normal operation mode.
• Blinking slowly: the unit is in loopback mode.
• Blinking quickly: the unit has a hardware error.
LKF - Fiber Link/Activity
• On: Fiber link present.
• Blinking quickly: Fiber link present and receiving data.
• Blinking slowly: Fiber link disabled because the copper link
went down.
• Off: No fiber link present.
LKC - Copper Link/Activity
• On: Copper link is present.
• Blinking quickly: Copper link present and receiving data.
• Blinking slowly: Copper link disabled because the fiber link
went down.
•
Off: No copper link present
.