Filter
Top Products
Gigabit Media Converter – Installation Guide
3
Installation
These are the steps required to configure the Perle Gigabit media
converter:
1. Insert SFP Module (SFP Model only)
2. Set the switch settings. (optional)
3. Install and connect the fiber cable.
4. Install and connect the copper cable.
5. Power up the media converter.
The default switch settings (all switches in the UP position) will
work for most installations.
DIP Switches
The DIP switches are accessible through the opening in the side
of the enclosure.
Note: Switch changes made when the product is powered up take
effect immediately and will result in a link reset on both ports.