Filter
Top Products
5A,A.S.T.A. or BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your
socket outlets, it should be cut off and an
appropriate 3-pin plug fitted in its place.
If the mains plug contains a fuse, this
should have a value of 5A. If a plug without
a fuse is used, the fuse at the distribution
board should not be greater than 5A.
Note: The severed plug must be destroyed
to avoid a possible shock hazard should it
be inserted into a 13A socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in
accordance with the following code:
BLUE - "NEUTRAL" ("N")
BROWN - "LIVE" ("L")
GREEN & YELLOW - "GROUND" ("G")
1. The GREEN AND YELLOW wire must
be connected to the terminal in the plug
which is marked with the letter "G" or by
the Ground symbol or coloured GREEN
or GREEN AND YELLOW.
第 14 頁，共 17 頁Regulatory Information
98-03-06file://E:\LCD Monitor OEM\Philips\M1-pro
j
ect\225B1\225B1-EDFU\5B.0QC01.001\CD-Contents\lcd\manual\ARABIC\225B1\safet
y
\re
g
...