Philips SRC2063WM/17 Boat User Manual


 
8 EN
During initial setup
1 Makesurethereceivingdeviceisableto
respond.E.g.whenyoutrytorepairthePlay
buttonforyourDVDplayer,makesureto
insertaDVDintotheDVDplayerotherwise
thePlaybuttonisnotabletofunction.
2 Pressthebuttonthatdoesnotfunction,keep
itpressedandimmediatelyreleaseitwhen
thedeviceresponds.Repeatthisforevery
buttonthatdoesnotfunction.
• Ifthebuttonstilldoesnotfunctionas
expected,trypressingitagainforalonger
periodoftime.
After initial setup
1 Makesurethereceivingdeviceisableto
respond.E.g.whenyoutrytorepairthePlay
buttonforyourDVDplayer,makesureto
insertaDVDintotheDVDplayerotherwise
thePlaybuttonisnotabletofunction.
2 Selectthedevice
thatyouwishto
operate(e.g.DVD).
Pressthe
or
deviceselection
buttontoselect
DVD.
3 Keepbuttons

and pressed
simultaneously for
5 seconds.
• TheredSetup
light
lights
up.Theremotecontrolisnowinsetup
mode.
4 Press and holdthebuttonthatdoesnot
functionandimmediatelyreleaseitwhenthe
deviceresponds.
• Ifthebuttonstilldoesnotfunctionas
expected,trypressingitagainforalonger
periodoftime.
5 Pressthe or
selectionbutton
twicetosaveyour
settingsandexit
setupmode.
Whenno
buttonispressedfor5minutesormore,
theremotecontrolwillexitsetupmode,
automaticallysavingallyoursettings.
5sec.
2x
SRP2063WM_17__Manual 8 25-11-09 13:11