Filter
Top Products
6
Selecting a
Source
Selecting a Source
In this guide, a source is any type of picture. It might be an ana-
log computer image, a video processor, a VCR or DVD, or it
might be a DVI picture from a computer.
Selecting the Source Automatically
1 Press SOURCE on the remote. The
m40L/m46L goes to the next connector
that has a valid picture on it and dis-
plays that picture.
2 If you want to select a different source,
press
SOURCE again to select the next
connector (that has a valid picture on
it) and display the picture.
Note:
If a connector does not have a valid source, the m40L/m46L
briefly displays that it has scanned that connector and then proceeds
to the next connector.
Selecting the Source Manually
1 Press FREQ/PHASE on the remote. The m40L/m46L dis-
plays the
PICTURE menu for the current source.
2With
SOURCE highlighted, press the + button to open the
SOURCE submenu.
Note:
The SOURCE submenu displays to the right of the PICTURE
menu.
3In the SOURCE submenu, use the up/down arrows keys to
select the desired source.
4 When the desired source is selected, press
ENTER. The
PICTURE menu changes to display the settings for that
source.
When the Source is Familiar to m40L/m46L
When a "new" source is selected, the m40L/m46L looks through
a list of the last 10 picture types it used. If the “new” source is
like a previous one in this list (resolution, number of active lines,
etc.), the m40L/m46L uses the stored data. This saves time, and
the picture is displayed faster without going through adjust-
ments, which are visible on the screen.
Best Way to Change a Source
The best way to select a source is to recall a configuration your
service provider has created for you. See the Installation & Con-
figuration Guide CD for more detailed information.
1 On the remote, press
SAVE. The RECALL menu displays.
2 Using the arrow keys, scroll to one of the numbered con-
figurations your service provider has created for you.
3 Press
ENTER to display the RECALL SLOT menu.
4With the
RECALL NOW line selected, press ENTER. If the top
of the menu displays “Current”, the source is identical to
the settings stored in the memory slot.
Picture
Source Digital
Colorspace RGB
Vertical Frequency (frame locked) 60Hz
Horizontal Frequency 50.00kHz
Horizontal Resolution 1366
Vertical Resolution 768
Sharpness 4
Downloaded From TV-Manual.com Manuals