Filter
Top Products
OPERATION
o
CAUTION:
DO
NOT
USE
THIS
INVERTER
WITH
THE
FOLLOWING:
• Small battery operated appliances such
as
RECHARGEABLE FLASHLIGHTS,SOME RECHARGEABLE
SHAVERS and
NIGHT
LIGHTS that
are
plugged directly into
as
RECEPTACLE
TO
RECHARGE
•
BATIERY
CHARGERS
used with certain power tool battery pecks. These chargers will have a WARNING
LABEL stating that
DANGEROUS
VOLTAGE
ARE
PRESENT
AT
THE
CHARGERS
BATIERY
TERMINALS.
-WARNING:
Batteries contain corrosive materials and present
an
Energy Hazard.
To
prevent irritation and burns,
wear
protective wear and clothing, and take special care to ensure no metal tools
or
personal objects contact
the
battery terminals.
o The Power Source Connection
The
power source must provide between
10.3
to
15.6
Volts
DC
and must be able
to
supply
the
necessary
current to operate
the
load.
The
power source
may
be a battery
or
a well-regulated 12V1125A DC power
supply.
To
obtain
the
power source
must
deliver(in amperes), you can divide
the
power consumption
of
the
load (in watt) by 12 (the input voltage). For example,
the
load is rated
at
1000
Watts,
the
power source must
be
able
to
deliver: (tOOOlI2)=80 Amp.
Connect
the
inverter directly to a 12 Volt battery,
connect
the
BLACK cable to
the
to the NEGATIVE
(0)
and
RED cable to the POSITIVE (+) terminal of the battery. The reverse polarity connection wil result in a blown fuse
and
may
cause permanent damage
to
the
inverter.
Do
not
use
the
system with positive electrical grounding.
Be
sure
to
fasten all connections between battery chips and terminals.
3