Filter
Top Products
shes.
During the RCD phase the AUTO-
POWER-OFF function is disabled,
that is the instrument does not swit-
ch off automatically. To switch off,
press the ON/OFF key. If the stored
data are not reset they remain in
the memory until REC is pressed
again. When the key is pressed for
the first time it starts storing data in
the memory, the second time it sto-
ps data storage (the data stored so
far are not erased), the third time it
restarts storage and updates the
data.
When the key is pressed during
RECORD phase or at the end of Q
RECORD, before the DATA RESET
key is pressed, the display shows in
sequence the maximum value recor-
ded by the probe, the minimum
value, the Q Energy value and finally
the current value. If the DATA
RESET key has been pressed, the
"Err" message appears on the
display, referring to the maximum,
minimum and Q Energy values.
When the AUTO key is pressed the
instrument chooses what scale to
operate on. Change of scale is
automatic.
ENGLISH
– 28 –
MAX
MIN
AUTO
Symbols lit besides
the numbers
Key
Description