Filter
Top Products
21
4. Select any one CTCSS code found in the table
on Pages 22 and 23, then find the correspond-
ing switch positions in the tables.
5. With a pointed instrument, such as a pin, place
the dip switches in the positions that match the
desired tone.
For example:
Note: Setting Switch 8 to the down position dis-
ables the CTCSS feature. You must set the
switch to the up position to turn on CTCSS.
6. After setting your CTCSS code, replace the bat-
tery tray, battery pack, and battery compartment
cover, then turn on the transceiver.
1
2
3
45
6
78
Up
Position
Down
Position
19-902.fm Page 21 Tuesday, August 3, 1999 2:03 PM