Filter
Top Products
Care
14
%#4'
Keep the CB dry; if it gets wet, wipe it dry immediately. Use
and store the CB only in normal temperature environments.
Handle the CB carefully; do not drop it. Keep the CB away
from dust and dirt, and wipe it with a damp cloth
occasionally to keep it looking new.
5'48+%'"#0&"4'2#+4
If your CB is not performing as it should, take it to your local
RadioShack store for assistance. Modifying or tampering
with the CB’s internal components can cause a malfunction
and might invalidate its warranty.
4'2.#%+0)"6*'"(75'
The CB’s 2-amp in-line fuse helps protect your CB from
power surges and short circuits. When replacement is
required, use a 2-amp, slow-blow glass fuse.
.#
.#.#
.#
1. Make sure the power source and CB are both off.
2. Hold the fuse holder by both ends, push the ends
together, twist one end counterclockwise, then pull
them apart.
3. Remove the old fuse. If it is blown, insert a new one of
the same type and rating. If it is not blown, reinsert it.
4. Push the fuse holder ends together and twist one end
clockwise.
.
"%#76+10"
.
Do not use a fuse with ratings
other than those specified. Doing
so might damage your CB.