Filter
Top Products
19
Preparation
USING THE BELT CLIP
The supplied belt clip lets you easily at-
tach the transceiver to your belt.
Slide the belt clip onto the tab at the back
of the transceiver until it clicks. To re-
move the clip, pull up on its middle tab
and slide it down.
CONNECTING AN
EARPHONE/EXTERNAL
SPEAKER
To listen privately or to hear better in a
large area such as a warehouse, you can
pull up the rubber cover on the
EAR
and
MIC
jacks, then plug a monaural ear-
phone or an external speaker with a 3.5
mm (
1
/
8
inch) plug (not supplied) into the
EAR
jack on the side of the transceiver.
19-1207.fm Page 19 Friday, November 10, 2000 11:04 AM