Filter
Top Products
English-14
• STD, HRC, and IRC identify various types of
cable TV systems. Contact your local cable
company to identify the type of cable system that
exists in your particular area. At this point the
signal source has been selected. Proceed to
“Storing Channels in Memory” on page 43 of the
instruction manual.
When selecting Cable TV system :
Press the ▲ or ▼ button to select “Cable” or “Air + Cable”,
then press the ENTER button.
Press the ▲ or ▼ button to select “Digital Channel”, then
press the ENTER button.
Press the ▲ or ▼ button to select “STD”, “HRC”, or “IRC”,
press the ENTER button.
Press the ▲ or ▼ button to select “Analog Channel”, then
press the ENTER button.
Press the ▲ or ▼ button to select “STD”, “HRC”, or “IRC”,
press the ENTER button.
Press the ▲ or ▼ button to select “Start”, then press the
ENTER button to memorize the channels.
Auto Program
TV
Move Enter Return
Select the cable system.
Digital Channel : STD
√
Analog Channel : STD √
Start
Auto Program
TV
Move Enter Return
Select the cable system.
Digital Channel : STD
√
Analog Channel : STD √
Start
Auto Program
TV
Move Enter Return
Select the cable system.
Digital Channel : STD
Analog Channel : STD
Start
STD
HRC
IRC
Auto Program
TV
Move Enter Return
Select the cable system.
Digital Channel : STD
Analog Channel : STD
Start
STD
HRC
IRC
Auto Program
Enter Return
Auto Program in Progress.
CABLE Channel 67
Stop
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 14