Schumacher PIC-150-USB Marine Battery User Manual


 
• 1 •
IMPORTANT SAFETY INSTRUCTIONS1.
SAVE THESE INSTRUCTIONS.
Keep the inverter well ventilated in order to properly disperse heat
generated while it is in use. Make sure there are several inches of
clearance around the top and sides, and do not block the slots of
the inverter.
Make sure the inverter is not close to any potential source of
ammable fumes or clothing.
Do not place the inverter in areas such as battery compartments
or engine compartments where fumes may accumulate.
Keep the inverter dry.
DO NOT allow the inverter to come into contact with rain or moisture.
DO NOT operate the inverter if you, the inverter, the device being
operated or any other surfaces that may come into contact with
any power source are wet. Water and many other liquids can
conduct electricity, which may lead to serious injury or death.
Do not place the inverter on or near heating vents, radiators or
other sources of heat or ammable materials.
Do not place the inverter in direct sunlight. The ideal air
temperature for operation is between 50° and 80°F.
Only connect the power inverter to a 12-volt accessory power
outlet. Do not attempt to connect the inverter to any other power
source, including an AC power source. Connecting to a 6-volt or
16-volt battery will cause damage to the inverter.
Make sure the AC plug and/or USB connection is tight.
Do not modify the AC or USB receptacle in any way.
Do not try extending or otherwise changing the 12-volt power cord
attached to your inverter.
Incorrect operation of your inverter may result in damage and
personal injury. WARNING: The inverter output is 120V AC and
can shock or electrocute the same as any ordinary household AC
wall outlet.
Do not open – No user serviceable parts inside.