Filter
Top Products
6
1
2
3
4
5
6
Location and Function of Controls
1 INPUT select switch
Keep this switch released (øA) to monitor the signal from
the VIDEO A IN connector.
Depress this switch (ØB) to monitor the signal from the
VIDEO B IN connector.
2 H-HOLD (horizontal hold) control
When the picture has slanting horizontal bars, turn the H-
HOLD control in either direction until a stationary picture is
obtained.
3 V-HOLD (vertical hold) control
When the picture rolls up or down on the screen, turn the V-
HOLD control until a single stationary pictures is obtained.
4 POWER switch and indicator
To turn on the monitor, depress this switch. The green
indicator lights up.
To turn off the monitor, press the switch again.
5 CONTRAST control
Turn clockwise to increase picture contrast and
counterclockwise to decrease it.
6 BRIGHT (brightness) control
Turn clockwise for a brighter picture and counterclockwise
for a darker picture.
Front Panel
POWER switch
and indicator
CONTRAST
control
BRIGHT control
INPUT
select
switch
H-Hold
control
V-HOLD
control