SportsStuff 54-2010 Boat User Manual


 
Safety Valve: Afx the end of your inator hose into the opening in valve.
Make sure you open the ap inside the opening and inate until rm.
MONITORING & MAINTAINING PROPER INFLATION
To prevent serious damage to seams and I-beams, remove some air or move to a
shaded area when exposure to direct sunlight heats up the tube and causes the air
inside to expand. Add some air if exposure to cool air or water lowers the air pressure
inside.
WARRANTY POLICY:
Kwik Tek warrants, to the original purchaser only, that their high performance products, when
used for normal recreational purposes, are free from defects in material and workmanship for a
period of ninety (90) days from the date of purchase. This warranty excludes products for rental,
for hire, and other uses not considered normal recreational purposes. Kwik Tek will not be held
liable for incidental or consequential damages.
THE KWIK TEK WARRANTY DOES NOT COVER:
• Products without the KT Stamp, Kwik Tek Warranty Label, or Kwik Tek embossing on them
• Failures caused by over-ination and under-ination
• Snags, tears, cuts and punctures obtained during normal use
• Fading from exposure to sunlight or weathering
• Misuse, abuse and neglect
• Improper storage
For warranty issues call 800-624-1297. You may also send us an email at kwiktek@airhead.
com. Please have all information below ready when you call. We are unable to warranty a prod
uct without all pertinent information. Kwik Tek will make the nal warranty determination which
may require product inspection and/or photos of the product which clearly show defect(s).
IN ORDER TO PROCESS YOUR WARRANTY REQUEST, WE REQUIRE THE FOLLOWING
THREE ITEMS:
1.) Sales receipt with date of purchase.
2.) 14-18 digit code with dashes in it (found printed on the unit below the warning on the tube or
near the valve.)
3.) Photo showing KT stamp on product, Kwik Tek Warranty Label (found on underside of nylon
valve ap) and/or Kwik Tek embossing (found on the tube near the base of the valve.)
*YOUR WARRANTY REQUEST CAN NOT BE PROCESSED UNLESS YOU PROVIDE THE
INFORMATION REQUIRED ABOVE.