Filter
Top Products
HX270S Page 25
Key Continue Off
Normal Special
5.16.1 bEP (KEY BEEP)
Function: Enable/Disable the Keypad beeper.
Available Values: ON/OFF
Default: ON
5.16.2 dUL
(
DW DISPLAY
)
Function: Selects the Dual Watch scanning display mode.
Available Values: nor (Normal)/SPL (Special)
Default: SPL (Special)
When “Special” is selected, channel number which is the LCD shows re-
ceived channel.
5.16.3 LP
(
LAMP MODE
)
Function: Select the LCD/Keypad Lamp mode.
Available Values: kEy (KEY)/Cnt (Continue)/oFf
Default: kEy (KEY)
kEy: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
Cnt: Illuminates the LCD/Keypad continuously.
oFf: Disables the LCD/Keypad illumination.
5.16.4 SnL
(
SCAN LAMP
)
Function: Enable/Disable the Scan lamp while scanning is paused.
Available Values: ON/OFF
Default: ON
5.16.5 SCn
(
SCAN DISPLAY
)
Function: Select the display mode while scanning.
Available Values: nor (Normal)/SPL (Special)
Default: nor (Normal)
nor: The channel number changes when scanning.
SPL: The channel number only changes when the radio receives a trans-
mission. This lets you see the last channel on which someone called.