Filter
Top Products
HX750SPage 12
4.1.2 BATTERY INSTALLATION/REMOVAL
1. To install the battery pack, insert the battery pack into the battery rest on
the bottom of the transceiver, then turn the Battery Pack Lock to the “LOCK”
position with a coin.
2. To remove the battery pack, turn the transceiver off, open the Battery Pack
Lock on the bottom of the transceiver, then slide out the battery from the
transceiver.
NOTE
The battery lock must be set to “LOCK” position to ensure water integ-
rity and from the battery coming loose.
BELT CLIP INSTALLATION / REMOVAL
INSTALLATION
Install the Belt Clip as shown
below.
REMOVAL
Pulling the Belt Clip toward up
(
c
)
while pulling the top edge of
the Belt Clip toward back
(
d
)
.
c
d