Filter
Top Products
HX350S Owner’s Manual page 5
i SCAN KEY
Starts scanning programmed channels. Press this key for at least 1
second to turn on and off priority scan (scanning of programmed
channels and priority channel) during scan.
o MEM (Scrambler) KEY
Memorizes the selected channel. When pressed again, deletes the
memorized channel. Hold down this key for at least 1 second, to turn
the scrambler on and off. (if an optional CVS240 voice scrambler is
installed)
!0 A/B KEY
Immediately recalls two user assigned channels from any channel.
!1 H/L KEY
Toggles between high and low power. To change from low power to
high power, hold down this key on Canadian channel 13, USA channel
13 or 67.
!2 LAMP/ (key lock) KEY
Turns the lamp for LCD and keypad back-lighting on and off.
Hold down this key to lock the displayed channel functions (except the
H/L, PTT and LAMP/
keys) so that they are not accidentally
changed. The key lock symbol “
” appears to indicate that the
channel is locked. Hold down until the key lock symbol disappears to
unlock the channel.
!3 Antenna Connector
Connects the flexible antenna CAT350.
!4 Battery Pack
Provides DC power to the transceiver.
!5 External Speaker/Microphone Jack
Accepts optional CMP350 speaker/microphone. When the EXT jack is
used, the internal speaker is disabled.