Filter
Top Products
4.1. Check ing the pipe sys tem
Re move the flex i ble hose from the con nected ma te rial takeup.
Close the open end of the hose with your hand.
Con nect the unit to mains sup ply by the de vice plug.
If the tur bine is op er at ing, your hand must feel the suc tion within few sec onds.
If you don’t feel the vac uum it means that the pipe sys tem is not tight.
Check the pipe sys tem and seal any untight points you may have iden ti fied.
Re con nect the con vey ing hose.
Dis con nect the unit from mains sup ply by the de vice plug.
036-4MS
SSPET5
Putting into op er a tion 27