Filter
Top Products
4
CB-ONE MODULE ASSEMBLY
The CB-ONE Module is designed to fit the Suunto SM-36 analog
pressure gauges.
Before assembling the CB-ONE module the hose cover needs to be
fitted on the pressure hose. The hose cover ensures that the SM-36
pressure gauge fits properly on the CB-ONE module.
If the Suunto Quick Release is used, see section ‘CB-ONE module
assembly with Quick Release.’
After attaching the hose cover the pressure hose and gauge are
assembled on the CB-ONE front cover according to the picture.
After the pressure gauge is in place, the CB-ONE back cover (or
alternatively the CB-71/SK-8 Console Mount, back compass) is attached
with four screws.