Filter
Top Products
5
CB-ONE MODULE ASSEMBLY WITH QUICK RELEASE
If the Suunto Quick Release is used, the hose cover should be attached
on the high pressure hose below the female end of the Quick Release.
The male end is attached to the pressure gauge which is then fitted
onto the CB-ONE front cover as shown below.
CB-IN-LINE MODULE ASSEMBLY
The CB-IN-LINE module fits the Suunto Vyper, Vyper Air, HelO
2
and
Zoop dive computers or the SM-16 depth gauge.
The Vyper locks into place on the IN-LINE module back cover. For the
other instruments, lugs on the back cover aid alignment.