Suunto SS020365000 Scuba Diving Equipment User Manual


 
You can also use the stopwatch while diving for various timing
purposes. To activate the stopwatch in dive mode, keep [MODE]
pressed.
Start and stop the stopwatch by pressing [SELECT].
NOTE: If a deepstop activates while you are using the
stopwatch, the timer field is not visible.
3.20 Surface and no-fly time
Once back at the surface, Suunto D4i continues to provide post-dive
safety information and alarms. If, after your dive, you need to wait
until flying, the no-fly symbol displays in all modes.
To access further information about your surface and no-fly times,
enter dive mode.
Suunto D4i shows the time since you surfaced in the
Surf t.
field.
The airplane symbol indicates that you should not fly. The
countdown until you will be safe to fly is shown in the No Fly field.
48