Filter
Top Products
1. While in a dive mode, keep [DOWN] pressed.
2.
Press [UP] to scroll to Sample Rate and press [SELECT].
3. Press [DOWN] or [UP] to change the rate and confirm with
[SELECT].
4.
Press MODE to exit.
The sample rate options in air and nitrox modes are: 10, 20, 30 and
60 seconds.
The sample rate options in free dive mode are: 1, 2 and 5 seconds.
3.19 Stopwatch
The stopwatch can be used to measure elapsed and split times.
To activate the stopwatch:
1. While in time mode, scroll through the bottom row view by
pressing [UP] or [DOWN] until the stopwatch is displayed.
2. Press [SELECT] to start/stop the stopwatch.
3. Press [DOWN] to take split times.
4. Keep [SELECT] pressed to reset the stopwatch.
After stopping the stopwatch, you can scroll through the split times
with [DOWN].
47