Filter
Top Products
NOTE: Filling your BCD affects the air time calculation due to
the temporary increase in air consumption.
The remaining air time is not displayed when either deepstops or
the decompression ceiling has been activated. You can check
remaining air time by keeping [DOWN] pressed.
Temperature changes affect the tank pressure and consequently the
air time calculation.
Low air pressure warnings
The dive computer warns you with two (2) audible double beeps
and a blinking pressure display when the tank pressure reaches 50
bar (700 psi).
Two (2) double beeps sound when the tank pressure reaches the
defined alarm pressure and when the remaining time reaches zero.
3.22.1 Wireless transmission
To enable wireless transmission of tank pressure data to Suunto D4i
requires:
1. Installation of Suunto Wireless Transmitter onto your regulator.
2. Pairing the transmitter to your Suunto D4i.
3. Enabling the wireless integration in your Suunto D4i settings.
The transmitter enters power saving mode with slower data
transmission rate if the tank pressure remains unchanged for more
than five (5) minutes.
56