Filter
Top Products
After deepstop is over, the user can change between deepstop and
the timer by long pressing the MODE button.
Deepstops are presented the same way as safety stops. Suunto D4i
notifies you that you are in the deepstop area by displaying:
•
CEILING in the top
•
DEEPSTOP in the center row
•
Stop depth
•
Countdown timer
Deepstop is on by default in
Air
and
Nitrox
modes. To turn
deepstop off:
1. While in a dive mode, keep [DOWN] pressed.
2.
Press [DOWN] to scroll to
Deepstop
and enter with [Select].
3. Press [UP] to toggle on/off.
4. Press [MODE] to exit.
3.18 Sample rate
The sample rate controls how often information from the dive is
saved to the active log. The default sample rate is 20 seconds in air
and nitrox modes, and 2 seconds in free dive mode.
To change the sample rate:
46