Filter
Top Products
9 MEMORY MANAGER MODE
9-13
9.7 Data Communications
You can send a data file stored in the internal memory to a computer directly. Also, you can directly load
a coordinate data file and PCODE Library data to the internal memory from the computer.
9.7.1 Sending Data
Example: Sending a Measured data file
Operating procedure Operation Display
1 Press the [F3](MEMORY MGR.) key from the
menu 1/3.
[F3]
2 Press the [F4](P
↓
) key twice.
[F4]
[F4]
3 Press the [F1](DATA TRANSFER) key .
[F1]
4 Press the [F1] key.
[F1]
5 Select the type of data to send by pressing [F1]-
[F3] key.
Example : [F1](MEAS. DATA)
[F1]
6 Press the [F1](INPUT) key and enter File Name
you want to send. Press the [F4](ENT) key. *1),2)
[F1]
Enter FN
[F4]
7 Press the [F3](YES) key .*3)
The sending starts.
The display will return to menu.
[F3]
*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.
*2) To scroll the data, press the [ ]or[ ] key.
● To show the file list, press the [F2](LIST) key.
*3) To cancel the sending, press the [F4](STOP) key.
MEMORY MGR. 1/3
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN P
↓
MEMORY MGR. 3/3
F1:DATA TRANSFER
F2:INITIALIZE
P
↓
DATA TRANSFER
F1:SEND DATA
F2:LOAD DATA
F3:COMM. PARAMETERS
SEND DATA
F1:MEAS. DATA
F2:COORD. DATA
F3:PCODE DATA
SELECT A FILE
FN:_________
INPUT LIST ––– ENTER
SEND MEAS. DATA
>OK ?
––– ––– [YES][NO]
SEND MEAS. DATA
< Sending Data!>
STOP