Topcon GPT-2009 Marine Instruments User Manual


 
1-5
1 NOMENCLATURE AND FUNCTIONS
Angle measurement
Distance measurement mode
Coordinate measurement mode
Page
Soft
key
Display
mark
Function
1
F1 0SET Angle of Horizontal is set to 0°00'00"
F2 HOLD Hold the horizontal angle
F3 HSET Sets a required horizontal angle by entering numerals.
F4
P1
The function of soft keys is shown on next page (P2).
2
F1 TILT
Setting Tilt Correction
If ON, the display shows tilt correction value.
F2 REP Repetition angle measurement mode
F3 V% Vertical angle percent grade(%) mode
F4
P2
The function of soft keys is shown on next page (P3).
3
F1 H-BZ Sets the buzzer sound for every horizontal angle 90°
F2 R/L Switches R/L rotation of horizontal angle.
F3 CMPS Switches the COMPASS ON/OFF of vertical angle.
F4
P3
The function of soft keys is shown on next page (P1).
1
F1 MEAS Start measuring
F2 MODE Sets a measuring mode, Fine/Coarse/Tracking
F3 NP/P Switches non-prism mode or prism mode.
F4
P1
The function of soft keys is shown on next page (P2).
2
F1 OFSET Select Off-set measurement mode
F2 S.O Select stake out measurement mode
F3 S/A Select set audio mode
F4
P2
The function of soft keys is shown on next page (P3).
3
F2 m/f/i Switches meter, feet or feet and inch unit.
F4
P3
The function of soft keys is shown on next page (P1).
1
F1 MEAS Start measuring
F2 MODE Sets a measuring mode, Fine/Coarse/Tracking
F3 NP/P Switches non-prism mode or prism mode.
F4
P1
The function of soft keys is shown on next page (P2).
2
F1 R.HT Sets a prism height by input values.
F2 INSHT Sets an instrument height by input values.
F3 OCC Sets an instrument coordinate point by input values.
F4
P2
The function of soft keys is shown on next page (P3).
3
F1 OFSET Select Off-set measurement mode
F2 m/f/i Switches meter, feet or feet and inch unit.
F3 S/A Select set audio mode
F4
P3
The function of soft keys is shown on next page (P1).