Filter
Top Products
iii
About this Manual
This manual provides you with instructions on installing your FT48-
B5382, and consists of the following sections:
Chapter 1: Provides an Introduction to the FT48-B5382 bare-
bone, packing list, describes the external compo-
nents, gives a table of key components, and
provides block diagrams of the system.
Chapter 2: Covers procedures on installing the CPU, mem-
ory modules, PCI cards and hard drives.
Chapter 3: Covers removal and replacement procedures for
pre-installed components, introduces the fan
board, LED control board, SAS/SATA backplane,
and provides tables for pin definition.
Appendix: Describes the differences between mainboard
BIOS and system BIOS. Provides the cable con-
nection tables for reference of system setup.
Installing instructions for the SMDC card, expan-
sion hard drives, and server rackmounting are
also given.
For information on the mainboard, please refer to the attached main-
board user’s manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.