Filter
Top Products
75
Appendix IV: Rack Mounting (Option)
Installing the 5.25” Devices in Rackmount Position
Before mounting the FT48-B5382 in a rack, you need to
rotate all the drives to the rackmount position first. Follow the
steps as instructed below.
1. Remove all the fans and the fan cradle first. Refer to the
first three steps given in “2.5 Installing the Floppy Disk
Drive (Option)”.
2. Disconnect all the cables from the devices placed in the
5.25” bays as shown.
3. Unfasten the installed drives or the empty drive brackets
from the chassis in the direction of the arrow shown.