Filter
Top Products
E-10
Uniden Atlantis 270 Radio Owner’s Manual
Using the radio in scan mode
x To activate scan mode, press SCAN DUAL.
x You must have at least two channels in memory to start
a scan.
x You cannot transmit while in scan mode.
x To save a channel into memory, select the channel,
then press and hold the L/M/H MEM key. The
MEM
icon
displays whenever you tune to that channel.
x To remove a channel from memory, set the radio to that
channel, then press and hold the L/M/H MEM key. The
MEM icon no longer displays.
x When the radio stays on a channel, press Channel Up to
leave that channel and resume scanning.
x To end the scan, press the SCAN DUAL key again; the
radio remains on the last scanned channel.
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while in scan mode, the
radio checks the most recently-used weather channel every
seven seconds, then continues scanning the next channel in
memory:
Scan mode with Triple Watch or Dual Watch
If you activate Triple Watch while operating in scan mode,
the radio checks channels 9 and 16 every two seconds, then
goes on to scan the next channel; with Dual Watch turned
on, the radio only checks channel 16:
Every few seconds, the radio
checks the last-used weather
channel, then scans the next
channel.
wx
WX Alert
Watch on
Memory Channel Scan
08 252417151413121110 20