Filter
Top Products
16
MARK LOCATION
Mark Location is used to store in memory a location, which may be used in future as a point to navigate back to, or
safety alert location.
The quick access locations are to mark your HOME, OFFICE, HOTEL, AIRPORT or BOATRAMP locations. You may
mark the location with the current GPS coordinates or adjust the coordinates to suit.
1. Move the GPS105 to the location you wish to mark, or have the desired
coordinates at hand.
2. Press and hold .
3. Scroll to highlight desired quick access name.
4. Press .
The quick access display appears with the quick access name and the current GPS coordinates:
If no GPS is available the last GPS position appears.
5. You may change the longitude & latitude values by pressing to move the cursor and pressing
to change the value.
6. Press to confirm.
OPERATION FLOW
!
!
The longitude and latitude coordinates must be valid coordinates in the South
Pacific Area.
The coordinates are displayed in WGS-84 data format.
QUICK ACCESS LOCATIONS
PRESS & HOLD
HOME
Example
MRK
MRK
ENT
ENT
ENT
ENT
°
°
Example