E-13
Uniden MHS050-2 Owner’s Manual
Select a Channel
Press CH or CH to scroll though the channels individually.
Press and hold CH
or CH to scroll rapidly through the
channel numbers. Refer to page 19 for a list of available channels
and their corresponding frequencies and usage guidelines.
Set Squelch
Use squelch to eliminate any annoying background noise when
there are no signals present.
NOTE
Make sure to first select a channel not in use before
setting the squelch.
Think of the squelch control as a gate. If
you increase the squelch level to maximum,
it raises the “Squelch Gate” so only the
strongest signals get through.
If you decrease the squelch level to minimum,
it lowers the “Squelch Gate”’ to the extent that
weak signals can get through.
If unwanted weak and noisy signals are
getting through, increase the squelch level
(raise the “Squelch Gate”) to a medium level.
Now only medium and strong signals get
through.
S1 - minimum squelch
S2 - medium squelch