Filter
Top Products
3-13
Operation 3
BIMINI
™
TOP (212X MODEL)
The Bimini top is normally covered and
secured to the top rail of the Wakeboard
Tower. To deploy the top, follow the
steps below:
1) Unclip the two fasteners that hold
the Bimini storage cover and top to
the Wakeboard Tower rail. Remove
the storage cover.
2) Unwrap the top canvas and attach
the three zippered flaps around the
rear top rail of the Tower.
3) Push the canvas and top frame
forward. Attach the front bow of the
frame to the Wakeboard Tower with
the lock pins ①. Unclip the two front
vertical support poles. Pull them down
and attach them to the Wakeboard
Tower with the lock pins ②.
Do not exceed 45 mph (72 km/h) with
the Bimini top in the up position.
Storing the Bimini Top
1) Remove the pins holding the front
vertical support poles and the front
bow to the Wakeboard Tower. Pull
the top back against the Wakeboard
Tower.
2) Roll the fabric around the frames and
zip the storage cover into place.
Removing the Bimini Top
1) Follow the steps for Storing the
Bimini Top
2) Remove the lock pins holding the
Bimini top to the Wakeboard Tower.
3) The top can now be removed from
the boat.
When reinstalling the Bimini top, simply
reverse the removal steps making sure
the lock pins are fully engaged.
See page 4-4 for Bimini care informa-
tion.
①
②