Yamaha 40A Outboard Motor User Manual


 
4-10
E
*1. for Power trim and tilt model
*2. If equipped
*3. When operating in salt water, turbid or muddy water, the engine should be flushed with clean
water after each use.
EMK30114*
MAINTENANCE CHART
Frequency of maintenance operations may be adjusted according to the operating con-
ditions, but the following table gives general guidelines.
The mark (
) indicates the check-ups which you may carry out yourself.
The mark (1) indicates work to be carried out by your Yamaha dealer.
Carburetor Cleaning 1 1 1
Fuel filter Cleaning 4-16
Fuel system Inspection 4-15
Fuel tank *2 Cleaning 4-24
Throttle link Inspection/Adjustment 1
Idling speed Inspection/Adjustment 4-17
Spark plug
Cleaning/Adjustment/
4-13
Replacement
Oil tank water drain Cleaning 4-18
Oil pump Inspection/Adjustment 1
Power trim and tilt system
*1
Inspection 4-20
Wiring & Connector Inspection/Reconnect 4-19
Exhaust leakage Inspection 4-19
Water leakage Inspection 4-19
Grease points Greasing 4-11
Gear oil Change 4-23
Bolts & Nuts Retightening 4-29
Cowling clamp Inspection
Anode Inspection 4-25
Propeller Inspection 4-21
Motor exterior Inspection 4-29
Cooling water passages*3
Cleaning 4-5
Battery Inspection
(every
4-26
month)
Interval
Item
Initial Every
Refer
page
10 hours
50 hours
(3 months)
100 hours
(6 months)
200 hours
(1 year)
63B-9-19-4 (E) 4/18/01 11:40 AM Page 11