Filter
Top Products
3
Initialization
Initialization
The initialization screen is not normally displayed, except during installation.
TIP:
If it does appear, consult a Yamaha dealer.
Configuring the number of outboard motors
1. Turn the engine switch to “ON.” The
initialization screen is displayed.
2. Use “LI” (Up/Down) buttons on the
directional keypad to select the number
of outboard motors on your boat.
3. Set using the “SET” button.
4. The main screen is displayed.
SET
MENU
CANCEL
SET
MENU
CANCEL
1: Single-engine type
2: Twin-engine type
3: Triple-engine type
4P: Quadruple-engine type (PORT side)
4S: Quadruple-engine type (STBD side)
SET
MENU
CANCEL
6Y9_US_E0.fm Page 3 Tuesday, March 23, 2010 2:17 PM