Yamaha F40A Outboard Motor User Manual


 
3-22
E
UP
DN
701034*
UP
DN
403065
402076
411042
2) Push the power trim/tilt switch “UP”
until the outboard has tilted up com-
pletely.
3) Push the tilt support knob into the
clamp bracket to support the engine.
w
After tilting the engine, be sure to sup-
port it with the tilt support knob. Other-
wise, the engine could fall back down
suddenly if oil in the power trim/tilt unit
should lose pressure.
EMU01151
PROCEDURE FOR TILTING DOWN
Hydro-tilt model
1) Release the tilt-lock lever.
2) Hold the rear of the top cowling with
one hand, tilt the engine up slightly
and pull out the tilt support knob.
3) Slowly tilt the engine down.
4) Place the tilt-lock lever back into the
lock position.
EMU01328
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1) Push the power trim/tilt switch “UP”
until the engine is supported by the
tilt rod.
2) Pull out the tilt support knob.
3) Push the power trim/tilt switch “DN”
(Down) to lower the engine to the
desired position.
67C-9-12-3 5/2/01 10:52 AM Page 23