Filter
Top Products
Basic components
16
EMU26340
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
EMU26382
Top cowling lock lever (pull up type)
To remove the engine top cowling, pull up
the lock lever(s) and lift off the cowling.
When installing the cowling, check to be sure
it fits properly in the rubber seal. Then lock
the cowling by moving the lever(s) down-
ward.
EMU26460
Flushing device
This device is used to clean the cooling wa-
ter passages of the motor using a garden
hose and tap water.
NOTE:
For details on usage, see page 43.
1. Trim tab
2. Bolt
3. Cap
1. Tilt support lever
1
2
3
ZMU02525
A
B
A
B
ZMU01863
ZMU03979
1
1. Top cowling lock lever(s)
1. Top cowling lock lever(s)
ZMU03904
1
ZMU03905
1