Filter
Top Products
Features and functions
30
● If the remote control transmitter needs a
new battery or is not operating properly,
contact a Yamaha dealer. Do not attempt
to replace the battery yourself.
NOTE:
While the engine is running, input from the re-
mote control transmitter is not received.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including in-
terference that may cause undesired opera-
tion.
CAUTION:
ECJ00030
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authori-
ty to operate the remote control transmit-
ter.
EJU31150
Engine stop switch
Push the engine stop switch (red button) to
stop the engine normally.
EJU31160
Engine shut-off switch
Insert the clip, on the end of the engine shut-
off cord, under the engine shut-off switch
(black button). The engine will stop automati-
cally when the clip is removed from the
switch, such as if the operator falls off the wa-
tercraft.
WARNING
EWJ00010
● Always attach the engine shut-off cord
to your left wrist and the clip to the en-
gine shut-off switch BEFORE starting
the engine.
1 Transmitter holder
1 Engine stop switch
1 Clip
2 Engine shut-off cord
3 Engine shut-off switch
UF1K12E0.book Page 30 Friday, July 28, 2006 10:35 AM