INSTALLATION MANUAL • MN-29805 • 25.
ERROR CODES
Error
Code
Error Call Out in Display Description of Error Possible Cause
E34
Water level in steam
generator does not drop
during cleaning program
drain pump.
affecting water level probes.
E36
Oven cavity temperature is
a steam mode or cleaning
program
— Low water pressure.
— Wiring or connection issue.
— Water injection pipe obstructed.
E51
Water inside steam generator
level
— Low water pressure.
— Wiring or connection issue.
E53
Temperature
— See Motor Control Error Code list.
E54
Temperature
— See Motor Control Error Code list.
E55
not open
— Alignment issue between motor cam and vent
— Wiring or connection problem.
continued on next page
