INSTALLATION MANUAL • MN-29805 • 26.
ERROR CODES
Error
Code
Error Call Out in Display Description of Error Possible Cause
E57
During rinse no water
solenoid valve
— Low water pressure.
— Dual water solenoid valve obstructed or
E93
between display board and
low voltage relay board
— Ribbon cable defective.
— Relay board, low voltage, connector defective.
— Display board connector defective.
E94
between display board and
low voltage relay board
— Ribbon cable defective.
— Relay board, low voltage, connector defective.
— Display board connector defective.
E98
E99
E100
Software update may
— Ribbon cable defective.
— Relay board, low voltage, connector defective.
— Display board connector defective.
— Software may need to be updated again.
E101
Software update may
— Ribbon cable defective.
— Relay board, low voltage, connector defective.
— Display board connector defective.
— Software may need to be updated again.
E102
not properly activated.
or dislodged.
E103
Pressure
not properly activated.
direction.
