A SERVICE OF

logo

PowerBook G4 (15-inch FW800) Take Apart - 93
PC Card Cage
4. Verify the holes in the Sound/DC-in board, are aligned with the screw bosses under
them on the bottom case so that the PC card cage screws will install.
5. Install the replacement PC card cage and eject button.
Replacement Note: Ensure that the pin on the PC card cage eject button is secured
by the hole in the cage mechanism.
6. Lightly install all four screws before tightening (note: longer screws go in the back by
the flex cable), then tighten in the following order.
7. Reassemble the computer.
8. Testing the computer should include inserting a PC card to check that it can be locked
in and that the eject button works smoothly.