Debug
ARM DDI 0363E Copyright © 2009 ARM Limited. All rights reserved. 11-13
ID013010 Non-Confidential, Unrestricted Access
The Debug Self Address Offset Register is:
• in CP14 c0, sub-register c2
• a 32 bit read-only register
• accessible in User and Privileged modes.
Figure 11-4 shows the bit arrangement of the Debug Self Address Offset Register.
Figure 11-4 Debug Self Address Offset Register format
Table 11-9 shows how the bit values correspond with the Debug Self Address Offset Register
functions.
To use the Debug Self Address Offset Register, read CP14 c0 with:
MRC p14, 0, <Rd>, c2, c0, 0 ; Read Debug Self Address Offset Register
Debug bus self address offset value Reserved
Valid bits
31 12 11 2 1 0
Table 11-9 Debug Self Address Offset Register functions
Bits Field Function
[31:12] Debug bus self
address offset value
Indicates bits [31:12] of the two’s complement offset from the debug ROM physical
address to the physical address where the debug registers are mapped.
[11: 2] Reserved UNP on reads, SBZP on writes.
[1:0] Valid bits Reads b11 if DBGSELFADDRV is set to 1, otherwise reads b00.
DBGSELFADDRV must be set to 1 if DBGSELFADDR[31:12] is set to a valid
value.
