Save these instructions. For your safety, read and understand the information contained within. The owner and
operator shall have an understanding of this product and safe operating procedures before attempting to use this
product. Instructions and Safety information shall be conveyed in the operators native language before use of this
product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with
the use and misuse of the product. If any doubt exits as to the safe and proper use of this product as outlined in this
factory authorized manual, remove from service until which time it is clear. Inspect before each use. Do not use
if broken, bent, cracked or otherwise damaged parts are noted. If the crane has been or suspected to have been
subjected to a shock load, discontinue use until checked out by an authorized factory service center. Owners and
operators of this equipment shall be aware that the use and subsequent repair of this equipment may require special
training and knowledge. It is recommended that an annual inspection be done by qualiî‚żed personnel and that any
missing or damaged parts, decals, warning / safety labels or signs be replaced with factory authorized replacement
parts only. Any crane that appears to be damaged in any way, is worn or operated abnormally should be removed
from service immediately until such time as repairs can be made.
PRODUCT DESCRIPTION
Atd Tools Engine Cranes are designed to safely lift and lower rated capacity engines. It is an aid in the removal and
installation of automotive and light truck engines. Welded steel tube construction, heavy duty chains and safety
hooks, steel casters and wheels along with compliance with the latest ASME / ANSI - PALD standards ensure safety,
strength and stability. Model Atd-7485 is a foldable, space saver design. Each has air actuated option.
2
Hook
Rear Caster
Front Extension Legs
Front Caster
Boom Ex-
tension
Boom
Hydraulic
Unit (jack)
Base
Handle
Braces
Upright
Rear Exten-
sion Legs
Front Legs
Hook
Hydraulic
Unit (jack)
Caster
Braces
Boom
Upright
Handle
Base
Boom Extension
Crane
Handle
Middle
Wheels
Front Wheel
Figure 2- Model Atd-7485 Components
Figure 1- Model Atd-7484 Components
SPECIFICATIONS
Model
Boom
Position
Capacity
Min. Hook
Height
Max. Hook
Height
Boom Length
Atd-7484
1 2 Ton 18-3/8" 69-1/4" 48-3/4"
2 1-1/2 Ton 14" 75-1/4" 57-3/4"
3 1 Ton 9-1/4" 81-1/4" 66-3/4"
4 1/2 Ton 5" 86-1/2" 76-3/4"
Atd-7485
1 2 Ton 0" 59-1/4" 48-5/8"
2 1-1/2 Ton 0" 63" 55-5/8"
3 1 Ton 0" 66-5/8" 62-7/8"
4 1/2 Ton 0" 70-1/2" 69-7/8"
