Ethernet Client Filter
The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to manage
your network control to accept trafc from specic authorized machines or can restrict unwanted
machine(s) to access your LAN.
There are no pre-dene Ethernet MAC address lter rules; you can add the lter rules to meet your
requirements.
Ethernet Client Filter: Default setting is set Disable.
Allowed: check to authorize specic device accessing your LAN by insert the MAC Address
in the space provided or click the Candidate button. Make sure your PC’s MAC is listed.
Blocked: check to prevent unwanted device accessing your LAN by insert the MAC Address
in the space provided or click the Candidate button. Make sure your PC’s MAC is not listed.
The maximum client is 16. The MAC addresses are 6 bytes long; they are presented only in
hexadecimal characters. The number 0 - 9 and letters a - f are acceptable.
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included.
Candidates: automatically detects devices connected to the router through the Ethernet. .
Click the Candidate button to access the Active PC in LAN window.
Active PC in LAN: Active PC in LAN displays a list of individual Ethernet device’s IP Address &
38
