BMC Software, Inc., Confidential and Proprietary Information
204 Application Enhancement Solutions Messages Manual
BMC74246I RECORD COUNT REPOSITION USED FOR DDN=ddname
Explanation: During restart processing for an application sequential access
method (ASAM) data set, APPLICATION RESTART CONTROL (AR/CTL)
determined that standard repositioning techniques could not be used because the data
set had been moved to a different device or had been reblocked. Instead of using
high-speed repositioning techniques, AR/CTL will read the data set records
sequentially until it reaches the correct restart position.
System Action: Processing continues, and the data set is repositioned for
application restart.
User Response: This condition normally occurs if the data set has been moved for
any reason. The data set movement might have occurred because of Storage
Management Subsystem (DFSMS) migration, use of the ASAM Copy utility, or
other reasons. Such movements can cause changes to the number or relative position
of the blocks within a data set.
BMC74247I TERMINATION OF THE DB2 CALL TRACE WAS COMPLETED ON
BEHALF OF requestor.
Explanation: APPLICATION RESTART CONTROL (AR/CTL) has terminated
enhanced call tracing of the application program calls to the DB2 subsystem on
behalf of the given requestor.
System Action: Processing continues.
User Response: This message is for your information only. No action is necessary.
BMC74248I COMMENCEMENT OF THE DB2 CALL TRACE WAS COMPLETED ON
BEHALF OF requestor.
Explanation: APPLICATION RESTART CONTROL (AR/CTL) started
enhanced call tracing of the application program calls to the DB2 subsystem on
behalf of the given requestor.
System Action: Processing continues.
User Response: This message is for your information only. No action is necessary.
